Silicone Rubber exhibits:

Superior Temperature Resistance (-80°F to +450°F) • Fungus Resistant Material • Water Resistant • Excellent Chemical Resistances (Acids, Oxidizing Chemicals , Ammonia)

WARCO BILTRITE Silicone Rubber

Select any of these drop down options to learn more about Silicone Rubber.

General Information

Common Name:
SIlicone

Chemical Name:
Polysilixane

Generally Resistant To:
Acid, Weather, Water, Sunlight, Ozone, Oxidation and Staining

Generally Attacked By:
Hydrocarbons, Ketones, Solvents, Impact and Abrasion

ASTM D 2000 / SAE J200 Classification:
FE, GE

MIL-R-3065 / SAE J-14 / MIL-STD-417 Classification:
TA

ASTM D-1418 Designation:
Q

Elongation:
100% to 900%

Hardness Range (Durometer Shore A):
30 to 90

Compression Set:
Good

Rebound Rating:
Good to Excellent

Flex Cracking Resistance:
Poor to Excellent

Abrasion Resistance:
Poor to Fair

Tear Resistance:
Poor

Impact Resistance:
Poor to Fair

Flame Resistance:
Good to Excellent

Minimum Service Temperature:
-80°F to -180°F

Maximum Service Temperature:
+550°F

Recommended Shelf Life:
20 years

Weather Resistance:
Excellent

Sunlight Resistance:
Excellent

Ozone Resistance:
Excellent to Outstanding

Oxidization Resistance:
Excellent

Water Resistance:
Excellent

Steam Resistance:
Fair to Good

Gas Permeability:
Poor to Fair

Radiation Resistance:

Good, 7 x 104 Ga Gy

Poor, 2 x 105 Ga Gy

Acetone:
Minor to Moderate Effect

Amonium Hydroxide:
RECOMMENDED: Little or Minor Effect

Animal Fats:
Minor to Moderate Effect

Carbon Dioxide:
RECOMMENDED: Little or Minor Effect

Chlorine:
DRY: – – –
WET: – – –

Fluorine (Liquid):
NOT RECOMMENDED

Fuel Oil:
NOT RECOMMENDED

Gasoline:
NOT RECOMMENDED

Hydrochloric Acid 37%:
HOT: NOT RECOMMENDED
COLD: Minor to Moderate Effect

Hydrochloric Acid Concentrate 37%:
HOT: NOT RECOMMENDED
COLD: NOT RECOMMENDED

Kerosene:
NOT RECOMMENDED

Methyl Ethyl Ketone:
– – –

Mineral Oil:
Minor to Moderate Effect

Naptha:
NOT RECOMMENDED

Natural Gas:
RECOMMENDED: Little or Minor Effect

Nitric Acid:
Concentrate: NOT RECOMMENDED
Dillute: Minor to Moderate Effect
Red Fuming: NOT RECOMMENDED

Petroleum:
Below 250: Minor to Moderate Effect
Above 250: NOT RECOMMENDED

Phosphoric Acid:
20%: – – –
45%: NOT RECOMMENDED

Propane:
– – –

Salt Water:
– – –

Skydrol:
Skydrol 500: Moderate to Severe Effect
Skydrol 7000: Minor to Moderate Effect

Sodium Hydroxide:
Minor to Moderate Effect

Sulfuric Acid:
Concentrate: NOT RECOMMENDED
Dillute: NOT RECOMMENDED
20% Oleum: NOT RECOMMENDED

Toluene:
NOT RECOMMENDED

Transformer Oil:
Minor to Moderate Effect

Vegetable Oils:
RECOMMENDED: Little or Minor Effect

Vinegar:
RECOMMENDED: Little or Minor Effect

  • Actual shelf life could vary dramatically based on storage conditions
  • Store in a cool, dry place with temperature below 75°F
  • Keep away from direct heat or open flames
  • Avoid contact with solvents or other fluids
  • Do not store in direct sunlight
  • Keep products wrapped or sealed to minimize the absorption of moisture
  • Store in a relaxed condition free from tension, compression or other deformation

See Rubber Storage Conditions for more information about how to properly store your rubber products

Silicone Rubber Products

Silicone rubber can withstand a wider range of temperature extremes than nearly all other elastomers, remaining viable from -80°F to +450°F. Silicone has excellent temperature range and good compression set. Silicone can withstand many extreme environments and is inherently a fungus resistant material. It can resist water and many chemicals, including some acids, oxidizing chemicals and ammonia.

Our Silicone rubber products are available in Commercial & Spec Grades or as a specialty product.

Please Select a Silicone Product Below:

Commercial Grade

INFINISIL™ Performance Silicone

Durometer: 40 to 80 Temperature Range: -80°F to +450°F
Primary Features: High & Low Temperature Resistance, Excellent Weathering Resistance

Specification Grade

INFINISIL™ Spec-Grade Performance Silicone

Durometer: 40 to 70 Temperature Range: -80°F to +450°F
Specs: A-A-59588 2A & 2B, AMS 3301, ASTM D 2000 M1GE

Specialty Silicone

INFINISIL™ Fiberglass Inserted Silicone

Durometer: 40 to 80 Temperature Range: -80°F to +450°F
Primary Feature: Made in the USA

INFINISIL™ FDA Performance Silicone

Durometer: 40 to 80 Temperature Range: -80°F to +450°F
Specs: FDA Approved Ingredients per 21 CFR 177.2600

Data presented here was gathered from several sources including Uniroyal Chemical Company, Inc., The Los Angeles Rubber Group, Inc., and Compass Publications

Our rubber products are a proprietary blend of various polymers formulated to meet stated physicals and specifications. The named product polymer is not necessarily the primary polymer representing the highest percentage of the polymer blend. Determination of the suitability of the goods for the uses and applications contemplated by Buyer and others shall be the sole responsibility of the Buyer or user. No guaranty is given with respect to length of service on any particular application. Suggestions or recommendations made by Seller in its product literature concerning uses or applications of the goods are believed to be reliable, but Seller makes no warranty or guaranty of results to be obtained since the conditions of the use and application by Buyer and others are beyond Seller’s control.

View complete Terms & Conditions of Sale for suitability of use and formulations