Product Description

Bio Diesel Nitrile

Bio Diesel Nitrile is specially designed and developed for use in environments where alternative fuels are present. Immersion test results indicate that these materials are compatible with alternative fuels and are suitable for Bio-Diesel B20 (20% Bio-Diesel and 80% Petroleum Diesel) and Bio-Diesel B100 (100% Bio-Diesel). Made in the USA.

Samples available upon request.

Product Image

Key Aspects

Temperature Range:-40°F to +220°F
Durometer Range (Shore A ± 5):60 to 70
Tensile Range (typical psi.):1000 to 1050
Elongation Range (typical %):300 to 350
Finishes Available:Smooth
Talc:Present
Primary Feature:Compatible with Bio-Diesel B20 & B100
Compound Number(s)Part Number(s)
060P06780044227325004422740000442614900044262976
0044262981004426298200442629830044262988
0044262990004426299400442629960044262997
0044262998004426299900442630000044263001
00442630020044263003
070P10420044260888004426300400442630050044263006
0044263007004426300800442630090044263010
0044263011004426301200442630130044263014
0044263015004426301600442630170044263018
00442630190044263020

Advanced Technical Details

Durometer
Hardness
(Shore A ± 5)
CompoundThickness
(inches)
Tensile
(typical psi)
Ultimate
Elongation
(typical %)
Estimated Weight
Per Linear Foot
(1/8″ x 36″)
FeaturesSpecification
Sheets
60060P06781/32 – 1/210503502.39 lbCompatible with
Bio-Diesel B20 & B100
70070P10421/32 – 1/210003002.4 lbCompatible with
Bio-Diesel B20 & B100

*Physicals are presented in typical values – we certify to the minimum value

Compound Numbers: 060P0678, 070P1042

Unsure on how to read our compound number? Read the page, “How to Read a Compound Number”.

General Information for WARCO Sheet Rubber

Rubber Roll Width

Standard WARCO Sheet rubber rolls are untrimmed and can measure approximately 3” in additional width. Trimmed rolled rubber is provided either 36”, 48” or 55” wide ± 1”

Custom widths are available, please call for details.

Rubber Roll Lengths

Standard Roll approximate length ±10%. Products may vary, please see product listing for standard roll lengths.

Sheet Roll Lengths:

  • 1/64″ thick – 180 feet
  • 1/32” thick – 150 feet
  • 1/16” thick – 100 feet
  • 3/32” thick – 65 feet
  • 1/8” thick – 50 feet
  • 3/16” thick – 30 feet
  • 1/4” thick – 25 feet
  • 5/16” thick – 20 feet
  • 3/8” thick – 16.5 feet
  • 1/2” thick – 12.5 feet

Sheet Rubber Thickness Tolerances

Closer tolerances and Custom thicknesses are available and can be priced on request.

WARCO Thickness Tolerance – Standard RMA

  • 0.031” & thinner: ± 0.010″
  • 0.032″ to 0.061″: ± 0.012″
  • 0.062″ to 0.124″: ± 0.016″
  • 0.125″ to 0.186″: ± 0.020″
  • 0.187″ to 0.374″: ± 0.031″
  • 0.375″ to 0.500″: ± 0.047″
  • 0.501″ to 0.750″: ± 0.094″
  • 0.751″ & thicker: ± 10%

Sheet Rubber Finish

Unless otherwise noted, sheet rubber has a standard smooth finish. Textured (fabric) finish and matte finish are available on most materials at an additional cost. Please call for details.

Sheet Rubber Color

The standard color of our sheet rubber is black, unless noted otherwise. Custom colors and color matching is available.

Test Reports

Short form test results, basic physicals, are available upon request at the time of the order. Full test reports for particular specifications will be also quoted on request. This may include certifying the ozone resistance, heat ageing, compliances, and many more aspects of our product. Certifications are sent with your order upon request at no charge.

More information about the WARCO products is available at General Product Information.

Our rubber products are a proprietary blend of various polymers formulated to meet stated physicals and specifications. The named product polymer is not necessarily the primary polymer representing the highest percentage of the polymer blend. Determination of the suitability of the goods for the uses and applications contemplated by Buyer and others shall be the sole responsibility of the Buyer or user. No guaranty is given with respect to length of service on any particular application. Suggestions or recommendations made by Seller in its product literature concerning uses or applications of the goods are believed to be reliable, but Seller makes no warranty or guaranty of results to be obtained since the conditions of the use and application by Buyer and others are beyond Seller’s control.

View complete Terms & Conditions of Sale for suitability of use and formulations

Other Nitrile Sheet Rubber Products

Premium Nitrile

  • Durometer: 40 to 90
  • Temperature Range: -30°F to +220°F
  • Specs: ASTM D2000 M1BG

Transformer Oil Nitrile

  • Durometer: 60 to 70
  • Temperature Range: -20°F to +250°F
  • Specs: ASTM D2000 5BG, General Electric EA12C11E7

MIL-R-6855 Class 1

  • Polymer: Nitrile
  • Durometer: 40 to 80
  • Temperature Range: -50°F to +220°F
  • Spec: MIL-R-6855 Class 1

WARCO White® FDA Nitrile

  • Durometer: 45 to 80
  • Temperature Range: -30°F to +220°F
  • Specs: ASTM D2000 M1BG, FDA Approved Ingredients per 21 CFR 177.2600