
INFINISIL FDA Performance Silicone
INFINISIL FDA Performance Silicone is designed for applications where food or consumables are present. FDA Silicone is low volatile, peroxide-free and does not discolor over time.
The ingredients used to make this product are listed in CFR 177.2600, an FDA regulation dealing with rubber articles that are intended for repeated food exposure. This material is ozone and UV resistant. Made in the USA.
Color: Red
Samples available upon request.
Temperature Range: | -80°F to +450°F |
Durometer Range (Shore A ± 5): | 40 to 80 |
Tensile (min. psi.): | 450 |
Elongation (min. %): | 150 to 300 |
Finishes Available: | Smooth |
Talc: | Talc-Free Available |
Specification: | FDA Approved Ingredients per 21 CFR 177.2600 |
We comply with the Buy American Act requirements.
Durometer Hardness (Shore A ± 5) | Compound | Thickness (inches) | Width (inches) | Tensile (min. psi) | Ultimate Elongation (min. %) | Estimated Weight Per Linear Foot (1/8″ x 36″) | Specifications |
---|---|---|---|---|---|---|---|
40 | 040S1090 | 1/32 – 1/4 | 36, 48 | 450 | 300 | 2.18 lb | FDA approved ingredients per 21 CFR 177.2600 |
50 | 050S1091 | 1/32 – 1/4 | 36, 48 | 450 | 250 | 2.54 lb | |
60 | 060S1092 | 1/32- 1/4 | 36, 48 | 450 | 200 | 2.67 lb | |
70 | 070S1093 | 1/32 – 1/4 | 36, 48 | 450 | 150 | 2.75 lb | |
80 | 080S1094 | 1/32 – 1/4 | 36, 48 | 450 | 150 | 2.77 lb |
Compound Numbers: 040S1090, 050S1091, 060S1092, 070S1093, 080S1094
Unsure on how to read our compound number? Read the page, “How to Read a Compound Number”.
Molded Sheet Size: 36″ x 36″ , 48″ x 48″
Trim: Untrimmed
Stock Item Minimum: One Foot
Non Stock Item Minimum: Please Contact Us for minimums & availability
Rubber Roll Width
Standard WARCO Sheet rubber rolls are untrimmed and can measure approximately 3” in additional width. Trimmed rolled rubber is provided either 36”, 48” or 55” wide ± 1”
Custom widths are available, please call for details.
Rubber Roll Lengths
Standard Roll approximate length ±10%. Products may vary, please see product listing for standard roll lengths.
Sheet Roll Lengths:
- 1/64″ thick – 180 feet
- 1/32” thick – 150 feet
- 1/16” thick – 100 feet
- 3/32” thick – 65 feet
- 1/8” thick – 50 feet
- 3/16” thick – 30 feet
- 1/4” thick – 25 feet
- 5/16” thick – 20 feet
- 3/8” thick – 16.5 feet
- 1/2” thick – 12.5 feet
Sheet Rubber Thickness Tolerances
Closer tolerances and Custom thicknesses are available and can be priced on request.
WARCO Thickness Tolerance – Standard RMA
- 0.031” & thinner: ± 0.010″
- 0.032″ to 0.061″: ± 0.012″
- 0.062″ to 0.124″: ± 0.016″
- 0.125″ to 0.186″: ± 0.020″
- 0.187″ to 0.374″: ± 0.031″
- 0.375″ to 0.500″: ± 0.047″
- 0.501″ to 0.750″: ± 0.094″
- 0.751″ & thicker: ± 10%
Sheet Rubber Finish
Unless otherwise noted, sheet rubber has a standard smooth finish. Textured (fabric) finish and matte finish are available on most materials at an additional cost. Please call for details.
Sheet Rubber Color
This product is red as opposed to our standard color of our sheet rubber, black. Custom colors and color matching is available.
Test Reports
Short form test results, basic physicals, are available upon request at the time of the order. Full test reports for particular specifications will be also quoted on request. This may include certifying the ozone resistance, heat ageing, compliances, and many more aspects of our product. Certifications are sent with your order upon request at no charge.
More information about the WARCO products is available at General Product Information.
INFINISIL® is a registered trademark of West American Rubber Company, LLC. All text containing the word “INFINISIL” is trademarked by West American Rubber Company, LLC regardless of whether the ® mark or ™ mark is attached or not.
Our rubber products are a proprietary blend of various polymers formulated to meet stated physicals and specifications. The named product polymer is not necessarily the primary polymer representing the highest percentage of the polymer blend. Determination of the suitability of the goods for the uses and applications contemplated by Buyer and others shall be the sole responsibility of the Buyer or user. No guaranty is given with respect to length of service on any particular application. Suggestions or recommendations made by Seller in its product literature concerning uses or applications of the goods are believed to be reliable, but Seller makes no warranty or guaranty of results to be obtained since the conditions of the use and application by Buyer and others are beyond Seller’s control. This specification, FDA Approved Ingredients per 21 CFR, refers to the inventory of substances authorized in Title 21 of the U.S. Code of Federal Regulations (21 CFR) for uses in contact with foods as illustrated by the Food and Drug Administration. The FDA is responsible for protecting public health by ensuring the safety, efficacy, and security of human and veterinary drugs, biological products, and more. This specification website can be found here: https://www.fda.gov/food/packaging-food-contact-substances-fcs/inventory-food-contact-substances-listed-21-cfr.
View complete Terms & Conditions of Sale for suitability of use and formulations