Purple to Pink INFINISIL Logo "Fiberglass Performance Silicone"

Product Description

INFINISIL Fiberglass Inserted Silicone

INFINISIL Fiberglass Inserted Silicone is preferred where dimensional stability from mechanically reinforced silicone sheet rubber is required.

It is resistant to extreme high and low temperature ranges and is proven to be an excellent gasketing material. With increased tensile strength from fiberglass reinforcement may be used in belting and diaphragm applications. Made in the USA.

Samples available upon request.

Product Image

Key Aspects

Temperature Range:-80°F to +450°F
Durometer Range (Shore A ± 5):40 to 80
Tensile Range (typical psi.):750 to 800
Elongation Range (typical %):300 to 450
Finishes Available:Smooth, Nylon*
Talc:Talc Free Available
Primary Feature:Fiberglass Insert

*Nylon Finish Always Talc Free

We comply with the Buy American Act requirements.

Advanced Technical Details

Durometer
Hardness
(Shore A ± 5)
CompoundThickness
(inches)
Width
(inches)
Tensile
(typical psi)
Ultimate
Elongation
(typical %)
Estimated Weight
Per Linear Foot
(1/8″ x 36″)
Specification
Sheets
40040S0842Rolls: 1/32 – 1/4
Molded Sheets: Up to 4
36, 487504502.36 lb
50050S0843Rolls: 1/32 – 1/4
Molded Sheets: Up to 4
36, 487504002.46 lb
60060S0844Rolls: 1/32 – 1/4
Molded Sheets: Up to 4
36, 488003502.63 lb
70070S0845Rolls: 1/32 – 1/4
Molded Sheets: Up to 4
36, 488003002.59 lb

*Physicals are based upon the rubber material only and are presented in typical values – we certify to the minimum value

Compound Numbers: 040S0842, 050S0843, 060S0844, 070S0845

Unsure on how to read our compound number? Read the page, “How to Read a Compound Number”.

Fiberglass Fabric Physicals

WeaveCountWeightThicknessBreaking StrengthSpecification
Plain28 x 2011.8 oz per sq yd0.013″525 x 375MIL-Y-1140H Class C Form 4
Roll Width: 36″ , 48″
Molded Sheet Size: 36″ x 36″ , 48″ x 48″
Trim: Untrimmed
Color: Black
Stock Item Minimum: One Foot
Non Stock Item Minimum: One Roll

General Information for WARCO Sheet Rubber

Rubber Roll Width

Standard WARCO Sheet rubber rolls are untrimmed and can measure approximately 3” in additional width. Trimmed rolled rubber is provided either 36”, 48” or 55” wide ± 1”

Custom widths are available, please call for details.

Rubber Roll Lengths

Standard Roll approximate length ±10%. Products may vary, please see product listing for standard roll lengths.

Sheet Roll Lengths:

  • 1/64″ thick – 180 feet
  • 1/32” thick – 150 feet
  • 1/16” thick – 100 feet
  • 3/32” thick – 65 feet
  • 1/8” thick – 50 feet
  • 3/16” thick – 30 feet
  • 1/4” thick – 25 feet
  • 5/16” thick – 20 feet
  • 3/8” thick – 16.5 feet
  • 1/2” thick – 12.5 feet

Sheet Rubber Thickness Tolerances

Closer tolerances and Custom thicknesses are available and can be priced on request.

WARCO Thickness Tolerance – Standard RMA

  • 0.031” & thinner: ± 0.010″
  • 0.032″ to 0.061″: ± 0.012″
  • 0.062″ to 0.124″: ± 0.016″
  • 0.125″ to 0.186″: ± 0.020″
  • 0.187″ to 0.374″: ± 0.031″
  • 0.375″ to 0.500″: ± 0.047″
  • 0.501″ to 0.750″: ± 0.094″
  • 0.751″ & thicker: ± 10%

Sheet Rubber Finish

Unless otherwise noted, sheet rubber has a standard smooth finish. Textured (fabric) finish and matte finish are available on most materials at an additional cost. Please call for details.

Sheet Rubber Color

The standard color of our sheet rubber is black, unless noted otherwise. Custom colors and color matching is available.

Test Reports

Short form test results, basic physicals, are available upon request at the time of the order. Full test reports for particular specifications will be also quoted on request. This may include certifying the ozone resistance, heat ageing, compliances, and many more aspects of our product. Certifications are sent with your order upon request at no charge.

More information about the WARCO products is available at General Product Information.

INFINISIL® is a registered trademark of West American Rubber Company, LLC. All text containing the word “INFINISIL” is trademarked by West American Rubber Company, LLC regardless of whether the ® mark or ™ mark is attached or not.

Our rubber products are a proprietary blend of various polymers formulated to meet stated physicals and specifications. The named product polymer is not necessarily the primary polymer representing the highest percentage of the polymer blend. Determination of the suitability of the goods for the uses and applications contemplated by Buyer and others shall be the sole responsibility of the Buyer or user. No guaranty is given with respect to length of service on any particular application. Suggestions or recommendations made by Seller in its product literature concerning uses or applications of the goods are believed to be reliable, but Seller makes no warranty or guaranty of results to be obtained since the conditions of the use and application by Buyer and others are beyond Seller’s control.

View complete Terms & Conditions of Sale for suitability of use and formulations

Other INFINISIL™ Sheet Rubber Products

INFINISIL Spec-Grade Performance Silicone

  • Durometer: 40 to 70
  • Temperature Range: -80°F to +450°F
  • Specs: A-A-59588 2A & 2B AMS 3301 – 3304 ASTM D2000 M1GE

INFINISIL™ FDA Performance Silicone

  • Durometer: 40 to 80
  • Temperature Range: -80°F to +450°F
  • Specs: FDA approved ingredients per 21 CFR 177.2600

INFINISIL Performance Silicone

  • Durometer: 40 to 80
  • Temperature Range: -80°F to +450°F
  • Primary Feature: High & Low Temperature Resistance, Excellent Weathering Resistance