General Purpose Grade TPE (Neutral)
General Purpose Grade TPE (Neutral) is a family of soft, as well as hard, colorable, versatile thermoplastic. This material combines good physical properties and chemical resistance for use in a wide range of applications. Made in the USA.
Color: Neutral
Samples available upon request.
Temperature Range: | -50°F to +275°F |
Durometer Range (Shore ± 5): | 40 to 87 |
Tensile Range (psi.): | 640 to 4000 |
Elongation (%): | 330 to 600 |
Finish: | Smooth |
Talc: | |
Specifications: | Daimler Chrysler
Ford General Motors |
We comply with the Buy American Act requirements.
Durometer Hardness Shore ± 5 |
Durometer Type |
Thickness (inches) |
Width (inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8″ x 36″) |
Specifications |
---|---|---|---|---|---|---|---|---|
55 201M0055 |
A | 0.02 – 0.25 | 24 | 640 | 330 | -50°F to +275°F | 1.27 lb |
|
64 201M0064 |
A | 0.02 – 0.25 | 24 | 1000 | 440 | -50°F to +275°F | 1.27 lb | MSAR20B, WSD-M2D379-A1, GMP.E/P.002 |
73 201M0073 |
A | 0.02 – 0.25 | 24 | 1200 | 375 | -50°F to +275°F | 1.27 lb | MSAR20C, WSD-M2D380-A1, GMP.E/P.003 |
80 201M0080 |
A | 0.02 – 0.25 | 24 | 1600 | 450 | -50°F to +275°F | 1.27 lb | MSAR20D, WSD-M2D381-A1, GMP.E/P.004 |
87 201M0087 |
A | 0.02 – 0.25 | 24 | 2300 | 550 | -50°F to +275°F | 1.27 lb | MSAR20E, WSD-M2D382-A1, GMP.E/P.005 |
40 203M0040 |
D | 0.02 – 0.25 | 24 | 2750 | 600 | -50°F to +275°F | 1.27 lb | MSAR30B, WSD-M2D441-A, GMP.E/P.006 |
50 203M0050 |
D | 0.02 – 0.25 | 24 | 4000 | 600 | -50°F to +275°F | 1.27 lb | MSAR30B, WSD-M2D712-A1, GMP.E/P.007 |
*Physicals are presented in typical values – we certify to the minimum value
Compound Numbers: 201M0055, 201M0064, 201M0073, 201M0080, 201M0087, 203M0040, 203M0050
Unsure on how to read our compound number? Read the page, “How to Read a Compound Number”.
Our rubber products are a proprietary blend of various polymers formulated to meet stated physicals and specifications. The named product polymer is not necessarily the primary polymer representing the highest percentage of the polymer blend. Determination of the suitability of the goods for the uses and applications contemplated by Buyer and others shall be the sole responsibility of the Buyer or user. No guaranty is given with respect to length of service on any particular application. Suggestions or recommendations made by Seller in its product literature concerning uses or applications of the goods are believed to be reliable, but Seller makes no warranty or guaranty of results to be obtained since the conditions of the use and application by Buyer and others are beyond Seller’s control.
View complete Terms & Conditions of Sale for suitability of use and formulations