Product Description

Commercial SBR

Exhibits good abrasion resistance, impact strength, resilience and tensile strength. Not suited for use with oils, fuels, solvents, or hydraulic fluids.

Product Image

Key Aspects

Temperature Range:-40°F to +180°F
Durometer Range (Shore A ± 5):40 to 80
Tensile:800 to 1000
Elongation:100 to 300
Finishes Available:Smooth, Nylon
Talc:Talc-Free Available
Primary Feature:Made in the USA
Compound Number(s)Part Number(s)
060A03870044228610004422868600442287990044228800
0044228882004423008200442525940044262531
0044262532004426253300442625340044262535

We comply with the Buy American Act requirements.

Advanced Technical Details

Durometer
Hardness
(Shore A ± 5)
Thickness
(inches)
Width
(inches)
Tensile
psi
Ultimate
Elongation
Percent
Temperature
Range
Primary Feature
401/32 – 1/436, 48800400-40°F to +180°FMade in the USA
501/32 – 1/436, 48800250-40°F to +180°FMade in the USA
601/32 – 1/436, 48800200-40°F to +180°FMade in the USA
701/32 – 1/436, 481000150-40°F to +180°FMade in the USA

Compound Number: 040A0389, 050A0390, 060A0387, 070A0391

Unsure on how to read our compound number? Read the page, “How to Read a Compound Number”.

General Information for WARCO Sheet Rubber

Rubber Roll Width

Standard WARCO Sheet rubber rolls are untrimmed and can measure approximately 3” in additional width. Trimmed rolled rubber is provided either 36”, 48” or 55” wide ± 1”

Custom widths are available, please call (714-532-3355) for details.

Standard Minimum Order Quantity

The minimum order quantity for a standard WARCO Sheet rubber is one roll. For custom applications, please call (714-532-3355) for more information.

Rubber Roll Lengths

Standard Roll approximate length ±10%. Products may vary, please see product listing for standard roll lengths.

Sheet Roll Lengths:

  • 1/64″ thick – 180 feet
  • 1/32” thick – 150 feet
  • 1/16” thick – 100 feet
  • 3/32” thick – 65 feet
  • 1/8” thick – 50 feet
  • 3/16” thick – 30 feet
  • 1/4” thick – 25 feet
  • 5/16” thick – 20 feet
  • 3/8” thick – 16.5 feet
  • 1/2” thick – 12.5 feet

Sheet Rubber Thickness Tolerances

Closer tolerances and Custom thicknesses are available and can be priced on request.

WARCO Thickness Tolerance – Standard RMA

  • 0.031” & thinner: ± 0.010″
  • 0.032″ to 0.061″: ± 0.012″
  • 0.062″ to 0.124″: ± 0.016″
  • 0.125″ to 0.186″: ± 0.020″
  • 0.187″ to 0.374″: ± 0.031″
  • 0.375″ to 0.500″: ± 0.047″
  • 0.501″ to 0.750″: ± 0.094″
  • 0.751″ & thicker: ± 10%

Sheet Rubber Finish

Unless otherwise noted, sheet rubber has a standard smooth finish. Textured (fabric) finish and matte finish are available on most materials at an additional cost. Please call for details.

Sheet Rubber Color

The standard color of our sheet rubber is black, unless noted otherwise. Custom colors and color matching is available.

Test Reports

Short form test results, basic physicals, are available upon request at the time of the order. Full test reports for particular specifications will be also quoted on request. This may include certifying the ozone resistance, heat ageing, compliances, and many more aspects of our product. Certifications are sent with your order upon request at no charge.

More information about the WARCO products is available at General Product Information.

Our rubber products are a proprietary blend of various polymers formulated to meet stated physicals and specifications. The named product polymer is not necessarily the primary polymer representing the highest percentage of the polymer blend. Determination of the suitability of the goods for the uses and applications contemplated by Buyer and others shall be the sole responsibility of the Buyer or user. No guaranty is given with respect to length of service on any particular application. Suggestions or recommendations made by Seller in its product literature concerning uses or applications of the goods are believed to be reliable, but Seller makes no warranty or guaranty of results to be obtained since the conditions of the use and application by Buyer and others are beyond Seller’s control.

View complete Terms & Conditions of Sale for suitability of use and formulations

Other SBR Sheet Rubber Products

SBR MIL-G-1149

  • Durometer: 50
  • Temperature Range: -40°F to +180°F
  • Specs: MIL-G-1149