Product Description

Nitrile AMS 3215 Fuel Resistant

This 70 durometer Nitrile AMS 3215 Fuel Resistant (NBR/Buna-N) is formulated for excelled resistance to continuous exposure to aromatic and aliphatic fuels meeting the SAE AMS 3215 specification requirements.

Samples available upon request.

Product Image

Key Aspects

Temperature Range:-30°F to +220°F
Durometer (Shore A ± 5):70
Tensile (typical):1700 psi
Elongation (typical):350%
Finishes Available:Smooth
Talc:Talc Present
Specification:SAE AMS 3215
Compound Number(s)Part Number(s)
070P04520044262600004426260100442626020044262603
0044262604004426260500442626060044262607
0044262608004426260900442626100044262611
00442626120044262613

We comply with the Buy American Act requirements.

Advanced Technical Details

SpecificationDurometer
Hardness
(Shore A ± 5)
Thickness
(inches)
Width
(inches)
TensileUltimate
Elongation
Temperature
Range
Estimated Weight
Per Linear Foot
(1/8″ x 36″)
TypicalTypical
AMS 3215
Fuel Resistant
(Nitrile)
701/64 – 1/436, 481700 psi350%-30°F to +220°F2.45 lb

Physicals are presented in typical values – we certify to the minimum value

Compound Number: 070P0452(70P452)

Unsure on how to read our compound number? Read the page, “How to Read a Compound Number”.

General Information for WARCO Sheet Rubber

Rubber Roll Width

WARCO Sheet rubber rolls are available in 36” or 48” width. Custom widths available up to 55″. Rolls are untrimmed and can measure approximately 3” in additional width. Trimmed rolled rubber is available upon request.

Custom widths are available, please call (714-532-3355) for details.

Standard Minimum Order Quantity

The minimum order quantity for a standard WARCO Sheet rubber is one roll. For custom applications, please call (714-532-3355) for more information.

Rubber Roll Lengths

Standard Roll approximate length ±10%. Products may vary, please see product listing for standard roll lengths.

Sheet Roll Lengths:

  • 1/64″ thick – 180 feet
  • 1/32” thick – 150 feet
  • 1/16” thick – 100 feet
  • 3/32” thick – 65 feet
  • 1/8” thick – 50 feet
  • 3/16” thick – 30 feet
  • 1/4” thick – 25 feet
  • 5/16” thick – 20 feet
  • 3/8” thick – 16.5 feet
  • 1/2” thick – 12.5 feet

Sheet Rubber Thickness Tolerances

Closer tolerances and Custom thicknesses are available and can be priced on request.

WARCO Thickness Tolerance – Standard RMA

  • 0.031” & thinner: ± 0.010″
  • 0.032″ to 0.061″: ± 0.012″
  • 0.062″ to 0.124″: ± 0.016″
  • 0.125″ to 0.186″: ± 0.020″
  • 0.187″ to 0.374″: ± 0.031″
  • 0.375″ to 0.500″: ± 0.047″
  • 0.501″ to 0.750″: ± 0.094″
  • 0.751″ & thicker: ± 10%

Sheet Rubber Finish

Unless otherwise noted, sheet rubber has a standard smooth finish. Textured (fabric) finish and matte finish are available on most materials at an additional cost. Please call for details.

Sheet Rubber Color

The standard color of our sheet rubber is black, unless noted otherwise. Custom colors and color matching is available.

Test Reports

Short form test results, basic physicals, are available upon request at the time of the order. Full test reports for particular specifications will be also quoted on request. This may include certifying the ozone resistance, heat ageing, compliances, and many more aspects of our product. Certifications are sent with your order upon request at no charge.

More information about the WARCO products is available at General Product Information.

Our rubber products are a proprietary blend of various polymers formulated to meet stated physicals and specifications. The named product polymer is not necessarily the primary polymer representing the highest percentage of the polymer blend. Determination of the suitability of the goods for the uses and applications contemplated by Buyer and others shall be the sole responsibility of the Buyer or user. No guaranty is given with respect to length of service on any particular application. Suggestions or recommendations made by Seller in its product literature concerning uses or applications of the goods are believed to be reliable, but Seller makes no warranty or guaranty of results to be obtained since the conditions of the use and application by Buyer and others are beyond Seller’s control. The specification listed here, SAE AMS, stands for the Society of Automotive Engineers International Aerospace Material Specifications, a global association of engineers and related technical experts in the aerospace, automotive, and commercial-vehicle industries. Their website can be found here: https://www.sae.org/publications/collections/content/dlibstd-ams.

View complete Terms & Conditions of Sale for suitability of use and formulations

Other Aerospace Material Specification (AMS) Grade Sheet Rubber Products

AMS 3205

  • Polymer: Neoprene
  • Durometer: 50
  • Temperature Range: -40°F to +220°F
  • Spec: AMS 3205

AMS 3208

  • Polymer: Neoprene
  • Durometer: 50
  • Temperature Range: -30°F to +220°F
  • Specs: AMS 3208