Product Description

FDA Neoprene

This off-white Neoprene material contains FDA approved ingredients per 21 CFR 177.2600, an FDA regulation dealing with rubber articles articles intended for repeated food exposure. Made in the USA.

Samples available upon request.

Product Image

Key Aspects

Temperature Range:-30°F to +220°F
Durometer Range (Shore A ± 5)40 to 60
Tensile Range (min. psi.):800 to 1400
Elongation Range (%):450 to 650
Finishes Available:Smooth
Talc:Talc-Free Available
Specification:FDA Approved Ingredients per 21 CFR 177.2600
Compound Number(s)Part Number(s)
040E10580044227390004422968800442296890044235266
0044235302004425258200442555970044261747
0044261748004426174900442617500044261751
055E10530044227413004422741600442274170044227419
0044227426004422742900442274320044227434
0044227439004422744100442617520044261753
060E10620044227449004422745000442275560044227558
0044228003004423011600442542690044255242
0044256201004426175400442617550044261756

We comply with the Buy American Act requirements.

Advanced Technical Details

Durometer
Hardness
(Shore A ± 5)
Thickness
(inches)
Width
(inches)
Tensile
PSI
Ultimate
Elongation
Percent
Temperature
Range
Estimated Weight
Per Linear Foot
(1/8″ x 36″)
SpecificationsSpecification
Sheets
40
040E1058
1/32 – 1/436, 48800650-30°F to +220°F2.65 lbFDA Approved
Ingredients per
21 CFR 177.2600
55
055E1053
1/32 – 1/436, 481400500-30°F to +220°F2.98 lbFDA Approved
Ingredients per
21 CFR 177.2600
60
060E1062
1/32 – 1/436, 481400450-30°F to +220°F2.98 lbFDA Approved
Ingredients per
21 CFR 177.2600

Compound Numbers: 040E1058, 055E1053, 060E1062

Unsure on how to read our compound number? Read the page, “How to Read a Compound Number”.

General Information for WARCO Sheet Rubber

Rubber Roll Width

Standard WARCO Sheet rubber rolls are untrimmed and can measure approximately 3” in additional width. Trimmed rolled rubber is provided either 36”, 48” or 55” wide ± 1”

Custom widths are available, please call for details.

Rubber Roll Lengths

Standard Roll approximate length ±10%. Products may vary, please see product listing for standard roll lengths.

Sheet Roll Lengths:

  • 1/64″ thick – 180 feet
  • 1/32” thick – 150 feet
  • 1/16” thick – 100 feet
  • 3/32” thick – 65 feet
  • 1/8” thick – 50 feet
  • 3/16” thick – 30 feet
  • 1/4” thick – 25 feet
  • 5/16” thick – 20 feet
  • 3/8” thick – 16.5 feet
  • 1/2” thick – 12.5 feet

Sheet Rubber Thickness Tolerances

Closer tolerances and Custom thicknesses are available and can be priced on request.

WARCO Thickness Tolerance – Standard RMA

  • 0.031” & thinner: ± 0.010″
  • 0.032″ to 0.061″: ± 0.012″
  • 0.062″ to 0.124″: ± 0.016″
  • 0.125″ to 0.186″: ± 0.020″
  • 0.187″ to 0.374″: ± 0.031″
  • 0.375″ to 0.500″: ± 0.047″
  • 0.501″ to 0.750″: ± 0.094″
  • 0.751″ & thicker: ± 10%

Sheet Rubber Finish

Unless otherwise noted, sheet rubber has a standard smooth finish. Textured (fabric) finish and matte finish are available on most materials at an additional cost. Please call for details.

Sheet Rubber Color

The standard color of our sheet rubber is black, unless noted otherwise. Custom colors and color matching is available.

Test Reports

Short form test results, basic physicals, are available upon request at the time of the order. Full test reports for particular specifications will be also quoted on request. This may include certifying the ozone resistance, heat ageing, compliances, and many more aspects of our product. Certifications are sent with your order upon request at no charge.

More information about the WARCO products is available at General Product Information.

Our rubber products are a proprietary blend of various polymers formulated to meet stated physicals and specifications. The named product polymer is not necessarily the primary polymer representing the highest percentage of the polymer blend. Determination of the suitability of the goods for the uses and applications contemplated by Buyer and others shall be the sole responsibility of the Buyer or user. No guaranty is given with respect to length of service on any particular application. Suggestions or recommendations made by Seller in its product literature concerning uses or applications of the goods are believed to be reliable, but Seller makes no warranty or guaranty of results to be obtained since the conditions of the use and application by Buyer and others are beyond Seller’s control. This specification, FDA Approved Ingredients per 21 CFR, refers to the inventory of substances authorized in Title 21 of the U.S. Code of Federal Regulations (21 CFR) for uses in contact with foods as illustrated by the Food and Drug Administration. The FDA is responsible for protecting public health by ensuring the safety, efficacy, and security of human and veterinary drugs, biological products, and more. This specification website can be found here: https://www.fda.gov/food/packaging-food-contact-substances-fcs/inventory-food-contact-substances-listed-21-cfr.

View complete Terms & Conditions of Sale for suitability of use and formulations

Other FDA Sheet Rubber Products

WARCO White® FDA Nitrile

  • Polymer: Nitrile
  • Durometer: 45 to 80
  • Temperature Range: -30°F to +220°F
  • Spec: ASTM D2000 M1BG, FDA Approved Ingredients per 21 CFR 177.2600

FDA Viton™ A

  • Polymer: FKM (Viton™)
  • Durometer: 75
  • Temperature Range: -20°F to +450°F
  • Spec: FDA Approved Ingredients per 21 CFR 177.2600