Product Description

Commercial Neoprene – 1300 Series

A cost effective general purpose material, intended to be used in less critical applications.

Product Image

Key Aspects

Temperature Range:-30°F to + 200°F
Durometer Range (Shore A ± 5):40 to 80
Tensile Range (typical psi.):700 to 1000
Elongation Range (typical %):150 to 350
Finishes Available:Smooth, Nylon, Paper
Talc:Talc-Free Available
Primary Feature:Made in the USA
Compound Number(s)Part Number(s)
040E02030044222606004422261200442226190044222624
0044222638004422264200442226530044222663
0044222675004422268300442226950044222702
050E02130044223125004422313000442231440044223153
0044223164004422316800442231780044223184
0044223195004422321200442232180044226638
0044226920004425373800442550760044261720
00442617210044261722
060E02350044223673004422371400442237350044223763
0044223792004422577400442262180044226232
0044226801004426172300442617240044261725
0044261726004426172700442617280044261729
00442617300044261731
070E02380044224460004422447600442244980044224518
0044224537004422455000442268520044227098
0044227168004426173200442617330044261734
0044261735004426173600442617370044261738
00442617390044261740
080E05720044224978004422498800442250000044225011
0044225025004422503100442617410044261742
0044261743004426174400442617450044261746

We comply with the Buy American Act requirements.

Advanced Technical Details

Durometer
Hardness
Shore A ± 5
Thickness
(Inches)
Width
(Inches)
Tensile
(Typical PSI)
Ultimate
Elongation
(Typical %)
Temperature
Range
Estimated Weight
Per Linear Foot
(1/8″ x 36″)
Specification
Sheets
40
040E0203
1/32 – 1/436, 48700350-30°F to +200°F2.11 lb
50
050E0213
1/32 – 1/236, 48750350-30°F to +200°F2.13 lb
60
060E0235
1/32 – 1/236, 481000250-30°F to +200°F2.42 lb
70
070E0238
1/32- 1/236, 481000200-30°F to +200°F2.46 lb
80
080E0572
1/32 – 1/436, 481000150-30°F to +200°F2.38 lbAvailable
Upon Request

Compound Number: 040E0203, 050E0213, 060E0235, 070E0238, 080E0572

Unsure on how to read our compound number? Read the page, “How to Read a Compound Number”.

General Information for WARCO Sheet Rubber

Rubber Roll Width

Standard WARCO Sheet rubber rolls are untrimmed and can measure approximately 3” in additional width. Trimmed rolled rubber is provided either 36”, 48” or 55” wide ± 1”

Custom widths are available, please call (714-532-3355) for details.

Standard Minimum Order Quantity

The minimum order quantity for a standard WARCO Sheet rubber is one roll. For custom applications, please call (714-532-3355) for more information.

Rubber Roll Lengths

Standard Roll approximate length ±10%. Products may vary, please see product listing for standard roll lengths.

Sheet Roll Lengths:

  • 1/64″ thick – 180 feet
  • 1/32” thick – 150 feet
  • 1/16” thick – 100 feet
  • 3/32” thick – 65 feet
  • 1/8” thick – 50 feet
  • 3/16” thick – 30 feet
  • 1/4” thick – 25 feet
  • 5/16” thick – 20 feet
  • 3/8” thick – 16.5 feet
  • 1/2” thick – 12.5 feet

Sheet Rubber Thickness Tolerances

Closer tolerances and Custom thicknesses are available and can be priced on request.

WARCO Thickness Tolerance – Standard RMA

  • 0.031” & thinner: ± 0.010″
  • 0.032″ to 0.061″: ± 0.012″
  • 0.062″ to 0.124″: ± 0.016″
  • 0.125″ to 0.186″: ± 0.020″
  • 0.187″ to 0.374″: ± 0.031″
  • 0.375″ to 0.500″: ± 0.047″
  • 0.501″ to 0.750″: ± 0.094″
  • 0.751″ & thicker: ± 10%

Sheet Rubber Finish

Unless otherwise noted, sheet rubber has a standard smooth finish. Textured (fabric) finish and matte finish are available on most materials at an additional cost. Please call for details.

Sheet Rubber Color

The standard color of our sheet rubber is black, unless noted otherwise. Custom colors and color matching is available.

Test Reports

Short form test results, basic physicals, are available upon request at the time of the order. Full test reports for particular specifications will be also quoted on request. This may include certifying the ozone resistance, heat ageing, compliances, and many more aspects of our product. Certifications are sent with your order upon request at no charge.

More information about the WARCO products is available at General Product Information.

Our rubber products are a proprietary blend of various polymers formulated to meet stated physicals and specifications. The named product polymer is not necessarily the primary polymer representing the highest percentage of the polymer blend. Determination of the suitability of the goods for the uses and applications contemplated by Buyer and others shall be the sole responsibility of the Buyer or user. No guaranty is given with respect to length of service on any particular application. Suggestions or recommendations made by Seller in its product literature concerning uses or applications of the goods are believed to be reliable, but Seller makes no warranty or guaranty of results to be obtained since the conditions of the use and application by Buyer and others are beyond Seller’s control.

View complete Terms & Conditions of Sale for suitability of use and formulations

Other Neoprene Sheet Rubber Products

FDA Neoprene

  • Durometer: 40 to 60
  • Temperature Range: -30°F to +220°F
  • Specs: FDA Approved Ingredients per 21 CFR 177.2600

Anti-Microbial Neoprene

  • Durometer: 40 to 60
  • Temperature Range: -30°F to +220°F
  • Specs: ASTM D2000 M2BC

Premium Neoprene

  • Durometer: 30 to 90
  • Temperature Range: -30°F to +220°F
  • Specs: ASTM D2000 M1BC