Product Description

Neoprene AMS 3208 Weather Resistant

Neoprene AMS 3208 Weather Resistant is optimized for superior resistance to weather exposure meeting the SAE AMS 3208 specification requirements. Made in the USA.

Samples available upon request.

Product Image

Key Aspects

Temperature Range:-30°F to +220°F
Durometer (Shore A ± 5):50
Tensile (psi.):1200
Elongation (%):300
Finishes Available:Smooth, Nylon
Talc:Talc Present
Specification:SAE AMS 3208
Compound Number(s)Part Number(s)
050E07050044223326004422332700442233290044223330
0044223331004422746200442274640044262593
0044262594004426259500442625960044262597
00442625980044262599

We comply with the Buy American Act requirements.

Advanced Technical Details

SpecificationDurometer
Hardness
(Shore A ± 5)
Thickness
(inches)
Width
(inches)
Tensile (psi)Ultimate
Elongation (%)
Temperature
Range
Estimated Weight
Per Linear Foot
(1/8″ x 36″)
Specification
Sheet
AMS 3208
Weather Resistant
(Neoprene)
501/64 – 1/436, 481200300-30°F to +220°F2.51 lb

*Physicals presented are typical values-we certify to the minimum value.

Compound Number: 050E0705

Unsure on how to read our compound number? Read the page, “How to Read a Compound Number”.

Roll Width: 36″ , 48″
Molded Sheet Size: 36″ x 36″ , 48″ x 48″
Trim: Untrimmed
Color: Black
Stock Item Minimum: One Foot
Non Stock Item Minimum: One Roll

General Information for WARCO Sheet Rubber

Rubber Roll Width

Standard WARCO Sheet rubber rolls are untrimmed and can measure approximately 3” in additional width. Trimmed rolled rubber is provided either 36”, 48” or 55” wide ± 1”

Custom widths are available, please call for details.

Rubber Roll Lengths

Standard Roll approximate length ±10%. Products may vary, please see product listing for standard roll lengths.

Sheet Roll Lengths:

  • 1/64″ thick – 180 feet
  • 1/32” thick – 150 feet
  • 1/16” thick – 100 feet
  • 3/32” thick – 65 feet
  • 1/8” thick – 50 feet
  • 3/16” thick – 30 feet
  • 1/4” thick – 25 feet
  • 5/16” thick – 20 feet
  • 3/8” thick – 16.5 feet
  • 1/2” thick – 12.5 feet

Sheet Rubber Thickness Tolerances

Closer tolerances and Custom thicknesses are available and can be priced on request.

WARCO Thickness Tolerance – Standard RMA

  • 0.031” & thinner: ± 0.010″
  • 0.032″ to 0.061″: ± 0.012″
  • 0.062″ to 0.124″: ± 0.016″
  • 0.125″ to 0.186″: ± 0.020″
  • 0.187″ to 0.374″: ± 0.031″
  • 0.375″ to 0.500″: ± 0.047″
  • 0.501″ to 0.750″: ± 0.094″
  • 0.751″ & thicker: ± 10%

Sheet Rubber Finish

Unless otherwise noted, sheet rubber has a standard smooth finish. Textured (fabric) finish and matte finish are available on most materials at an additional cost. Please call for details.

Sheet Rubber Color

The standard color of our sheet rubber is black, unless noted otherwise. Custom colors and color matching is available.

Test Reports

Short form test results, basic physicals, are available upon request at the time of the order. Full test reports for particular specifications will be also quoted on request. This may include certifying the ozone resistance, heat ageing, compliances, and many more aspects of our product. Certifications are sent with your order upon request at no charge.

More information about the WARCO products is available at General Product Information.

Our rubber products are a proprietary blend of various polymers formulated to meet stated physicals and specifications. The named product polymer is not necessarily the primary polymer representing the highest percentage of the polymer blend. Determination of the suitability of the goods for the uses and applications contemplated by Buyer and others shall be the sole responsibility of the Buyer or user. No guaranty is given with respect to length of service on any particular application. Suggestions or recommendations made by Seller in its product literature concerning uses or applications of the goods are believed to be reliable, but Seller makes no warranty or guaranty of results to be obtained since the conditions of the use and application by Buyer and others are beyond Seller’s control. The specification listed here, SAE AMS, stands for the Society of Automotive Engineers International Aerospace Material Specifications, a global association of engineers and related technical experts in the aerospace, automotive, and commercial-vehicle industries. Their website can be found here: https://www.sae.org/publications/collections/content/dlibstd-ams.

View complete Terms & Conditions of Sale for suitability of use and formulations

Other Aerospace Material Specification (AMS) Grade Sheet Rubber Products

AMS 3205

  • Polymer: Neoprene
  • Durometer: 50
  • Temperature Range: -40°F to +220°F
  • Spec: AMS 3205

AMS 3215

  • Polymer: Nitrile
  • Durometer: 70
  • Temperature Range: -30°F to +220°F
  • Specs: AMS 3215