Viton™ B Sheet
Viton™ B Sheet, made with Viton™ fluoroelastomers, has greater resistance and retains flexibility better after dry heat aging than Viton™ A. It is recommended for applications requiring maximum retention of elastic properties combined with good mechanical properties.
Viton™ B Sheet offers superior resistance to both diluted and concentrated aggressive acids. Made in the USA. Premium, specification, and commercial grades are available.
| Temperature Range: | -20°F to +450°F |
| Durometer Range (Shore A ± 5): | 70 to 75 |
| Tensile (min. psi.): | 1000 |
| Elongation Range (min. %): | 150 to 175 |
| Finishes Available: | Smooth, Nylon |
| Talc: | Talc Present |
| Specification: | ASTM D 2000 M1HK |
| Compound Number(s) | Part Number(s) | |||
|---|---|---|---|---|
| 070F0195 | 0044263104 | 0044263105 | 0044263106 | 0044263107 |
| 0044263108 | 0044263109 | 0044263110 | 0044263111 | |
| 0044263112 | 0044263113 | 0044263114 | 0044263115 | |
| 0044264607 | — | — | — | |
| 075F0165 | 0044230371 | 0044230372 | 0044256447 | 0044263093 |
| 0044263094 | 0044263095 | 0044263096 | 0044263097 | |
| 0044263098 | 0044263099 | 0044263100 | 0044263101 | |
| 0044263102 | 0044263103 | 0044263126 | — | |
We comply with the Buy American Act requirements.
| Durometer Hardness (Shore A ± 5) | Thickness (inches) | Width (inches) | Tensile (min. psi) | Ultimate Elongation (min. %) | Temperature Range | Estimated Weight Per Linear Foot (1/8″ x 36″) | Specifications |
|---|---|---|---|---|---|---|---|
| 70 070F0195 | 1/32 – 1/4 | 36, 48 | 1000 | 175 | -20°F to +450°F | 3.75 lb | ASTM D 2000 M1HK 707 |
| 75 075F0165 | 1/32 – 1/4 | 36, 48 | 1000 | 150 | -20°F to +450°F | 3.81 lb | ASTM D 2000 M1HK 807 Z1 (Z1 = 75 ± 5 Durometer) |
Compound Numbers: 070F0195, 075F0165
Unsure on how to read our compound number? Read the page, “How to Read a Compound Number”.
Rubber Roll Width
Standard WARCO Sheet rubber rolls are untrimmed and can measure approximately 3” in additional width. Trimmed rolled rubber is provided either 36”, 48” or 55” wide ± 1”
Custom widths are available, please call (714-532-3355) for details.
Standard Minimum Order Quantity
The minimum order quantity for a standard WARCO Sheet rubber is one roll. For custom applications, please call (714-532-3355) for more information.
Rubber Roll Lengths
Standard Roll approximate length ±10%. Products may vary, please see product listing for standard roll lengths.
Sheet Roll Lengths:
- 1/64″ thick – 180 feet
- 1/32” thick – 150 feet
- 1/16” thick – 100 feet
- 3/32” thick – 65 feet
- 1/8” thick – 50 feet
- 3/16” thick – 30 feet
- 1/4” thick – 25 feet
- 5/16” thick – 20 feet
- 3/8” thick – 16.5 feet
- 1/2” thick – 12.5 feet
Sheet Rubber Thickness Tolerances
Closer tolerances and Custom thicknesses are available and can be priced on request.
WARCO Thickness Tolerance – Standard RMA
- 0.031” & thinner: ± 0.010″
- 0.032″ to 0.061″: ± 0.012″
- 0.062″ to 0.124″: ± 0.016″
- 0.125″ to 0.186″: ± 0.020″
- 0.187″ to 0.374″: ± 0.031″
- 0.375″ to 0.500″: ± 0.047″
- 0.501″ to 0.750″: ± 0.094″
- 0.751″ & thicker: ± 10%
Sheet Rubber Finish
Unless otherwise noted, sheet rubber has a standard smooth finish. Textured (fabric) finish and matte finish are available on most materials at an additional cost. Please call for details.
Sheet Rubber Color
The standard color of our sheet rubber is black, unless noted otherwise. Custom colors and color matching is available.
Test Reports
Short form test results, basic physicals, are available upon request at the time of the order. Full test reports for particular specifications will be also quoted on request. This may include certifying the ozone resistance, heat ageing, compliances, and many more aspects of our product. Certifications are sent with your order upon request at no charge.
More information about the WARCO products is available at General Product Information.
Viton™ and any associated logo is a trademark or copyright of THE CHEMOURS COMPANY FC, LLC used under license by West American Rubber Company, LLC. Viton® is a registered trademark of DuPont Performance Elastomers. All text containing the word “Viton” is trademarked by THE CHEMOURS COMPANY FC, LLC regardless of whether the ™ mark is attached or not. | Dyneon™ is a trademark of 3M™. More information about Viton® can be found here: https://www.viton.com/en/. Fluorozone® is a trademark of West American Rubber Company, LLC
Our rubber products are a proprietary blend of various polymers formulated to meet stated physicals and specifications. The named product polymer is not necessarily the primary polymer representing the highest percentage of the polymer blend. Determination of the suitability of the goods for the uses and applications contemplated by Buyer and others shall be the sole responsibility of the Buyer or user. No guaranty is given with respect to length of service on any particular application. Suggestions or recommendations made by Seller in its product literature concerning uses or applications of the goods are believed to be reliable, but Seller makes no warranty or guaranty of results to be obtained since the conditions of the use and application by Buyer and others are beyond Seller’s control. The specification listed here, ASTM, stands for the American Society for Testing and Materials which is the developer and provider of voluntary consensus standards, related technical information, and services. Their website can be found here: https://www.astm.org/.
View complete Terms & Conditions of Sale for suitability of use and formulations
