Red Flurozone Rubber Logo "Premium Performance FKM"

Product Description

Fluorozone Premium Performance FKM

Fluorozone Premium Performance FKM made with 100% domestic-made premium Fluoroelastomer FKM polymer. With 66% Fluorine content, Fluorozone® Premium Performance FKM is comparable to A-type Fluoroelastomer products.

This material exhibits resistance to a broad range of oils, fuels, lubricants and most mineral acids. It has very good resistance to many aliphatic hydrocarbon fluids that act as solvents for many other rubbers. Also available in Blue and Brown. Made in the USA.

Samples available upon request.

Product Image

Key Aspects

Temperature Range: -20°F to +400°F
Durometer Range (Shore A ± 5):60 to 75
Tensile Range (min.):800 psi to 1000 psi
Elongation Range (min.):200% to 250%
Finishes Available:Smooth, Nylon
Talc:Talc-Free Available
Compliances:RoHS, REACH & CA Prop 65
Compound Number(s)Part Number(s)
060F02070044266393004426701900442679470044270117
0044270339004427153400442722800044274176
0049266946004926829000492689360049269900
0092267137009226713800922674210092272001
070F02330044272149004427389800442746660049270802
075F02050044266243004426624400442662450044266246
0044266247004426624800442662490044266250
0044266251004426625200442662530044266254
0049267832004926783400492678350049267836
0049267837004926783800492678390049267840
0049267841004926784200492678430049267844
0049267845004926784600492678470049267848
0049267849

We comply with the Buy American Act requirements.

Advanced Technical Details

Durometer
Hardness
(Shore A ± 5)
CompoundThickness
(inches)
TensileUltimate
Elongation
Estimated Weight
Per Linear Foot
(1/8″ x 36″)
MinimumTypicalMinimumTypical
60060F0207Rolls: 1/64 – 1/4
Molded Sheets: Up to 4
800 psi1200 psi250%350%3.65 lb
70070F0233Rolls: 1/64 – 1/4
Molded Sheets: Up to 4
900 psi1200 psi200%300%3.65 lb
75075F0205Rolls: 1/64 – 1/4
Molded Sheets: Up to 4
1000 psi1250 psi200%300%3.65 lb

Tensile & Elongation physicals are presented in minimum and typical values – we certify to minimum value

Compound Numbers: 060F0207(60F207), 070F0233(70F233), 075F0205(75F205)

Unsure on how to read our compound number? Read the page, “How to Read a Compound Number”.

General Information for WARCO Sheet Rubber

Rubber Roll Width

WARCO Sheet rubber rolls are available in 36” or 48” width. Custom widths available up to 55“. Rolls are untrimmed and can measure approximately 3” in additional width. Trimmed rolled rubber is available upon request.

Custom widths are available, please call (714-532-3355) for details.

Standard Minimum Order Quantity

The minimum order quantity for a standard WARCO Sheet rubber is one roll. For custom applications, please call (714-532-3355) for more information.

Rubber Roll Lengths

Standard Roll approximate length ±10%. Products may vary, please see product listing for standard roll lengths.

Sheet Roll Lengths:

  • 1/64″ thick – 180 feet
  • 1/32” thick – 150 feet
  • 1/16” thick – 100 feet
  • 3/32” thick – 65 feet
  • 1/8” thick – 50 feet
  • 3/16” thick – 30 feet
  • 1/4” thick – 25 feet
  • 5/16” thick – 20 feet
  • 3/8” thick – 16.5 feet
  • 1/2” thick – 12.5 feet

Sheet Rubber Thickness Tolerances

Closer tolerances and Custom thicknesses are available and can be priced on request.

WARCO Thickness Tolerance – Standard RMA

  • 0.031” & thinner: ± 0.010″
  • 0.032″ to 0.061″: ± 0.012″
  • 0.062″ to 0.124″: ± 0.016″
  • 0.125″ to 0.186″: ± 0.020″
  • 0.187″ to 0.374″: ± 0.031″
  • 0.375″ to 0.500″: ± 0.047″
  • 0.501″ to 0.750″: ± 0.094″
  • 0.751″ & thicker: ± 10%

Sheet Rubber Finish

Unless otherwise noted, sheet rubber has a standard smooth finish. Textured (fabric) finish and matte finish are available on most materials at an additional cost. Please call for details.

Sheet Rubber Color

The standard color of our sheet rubber is black, unless noted otherwise. Custom colors and color matching is available.

Test Reports

Short form test results, basic physicals, are available upon request at the time of the order. Full test reports for particular specifications will be also quoted on request. This may include certifying the ozone resistance, heat ageing, compliances, and many more aspects of our product. Certifications are sent with your order upon request at no charge.

More information about the WARCO products is available at General Product Information.

Fluorozone® is a registered trademark of West American Rubber Company, LLC. All rights reserved. All text containing the word “Fluorozone” is a registered trademarked by West American Rubber Company, LLC regardless of whether the ™ mark is attached or not.

Our rubber products are a proprietary blend of various polymers formulated to meet stated physicals and specifications. The named product polymer is not necessarily the primary polymer representing the highest percentage of the polymer blend. Determination of the suitability of the goods for the uses and applications contemplated by Buyer and others shall be the sole responsibility of the Buyer or user. No guaranty is given with respect to length of service on any particular application. Suggestions or recommendations made by Seller in its product literature concerning uses or applications of the goods are believed to be reliable, but Seller makes no warranty or guaranty of results to be obtained since the conditions of the use and application by Buyer and others are beyond Seller’s control.

View complete Terms & Conditions of Sale for suitability of use and formulations

More Viton™ & Fluorozone® Sheet Rubber Products

Fluorozone® Brown Premium Performance FKM

  • Polymer: 100% Domestic Fluoroelastomer
  • Durometer: 75
  • Temperature Range: -20°F to +400°F
  • Primary Features: Brown in color, 66% Fluorine

Viton™ A Specification Grade Sheet

  • Polymer: Viton™ Fluoroelastomer
  • Durometer: 75
  • Temperature Range: -20°F to +500°F
  • Specs: AMS 3216G, MIL-R-83248C Type II Class 1

Viton™ A Sheet

  • Polymer: Viton™ Fluoroelastomer
  • Durometer: 70 to 75
  • Temperature Range: -20°F to +400°F
  • Primary Feature: 66% Fluorine

Fluorozone® Mil-Spec Performance FKM

  • Polymer: 100% Domestic Fluoroelastomer
  • Durometer: 75
  • Temperature Range: -20°F to +500°F
  • Specs: AMS 3216, MIL-R-83248