Blue to Green Flurozone Rubber Logo "Mil-Spec Performance FKM"

Product Description

Fluorozone Mil-Spec Performance FKM

Fluorozone Mil-Spec Performance FKM sheet is formulated to meet the AMS 3216 specification (supercedes MIL-R-83248) and is made with 100% virgin domestic-made premium Fluoroelastomer polymer. Fluorozone Mil-Spec Performance FKM is our second offering in the Fluorozone® FKM product family.

This material exhibits a higher temperature range (up to 500°F) and increased tensile strength compared to Fluorozone Premium Performance grade. Fluorozone has very good resistance to many aliphatic hydrocarbon fluids that can dissolve many other types of rubber and has resistance to a broad range of oils, fuels, lubricants and most mineral acids. Made in the USA.

Samples available upon request.

Product Image

Key Aspects

Temperature Range:-20°F to +500°F
Durometer (Shore A ± 5):75
Tensile (min. psi.):1600
Elongation (min. %):125
Finish:Smooth
Talc:Talc-Present
Specification:AMS 3216G

MIL-R-83248C Type II Class 1

Compound Number(s)Part Number(s)
075F02120044266759004426722300442672240044267225
0044267226004426722700442672280044267229
0044267230004426723100442672320044267233
00442672340044267235

We comply with the Buy American Act requirements.

Advanced Technical Details

Durometer
Hardness
(Shore A ± 5)
CompoundThickness
(inches)
Tensile (psi)Ultimate
Elongation (%)
Estimated Weight
Per Linear Foot
(1/8″ x 36″)
Specifications
MinimumTypicalMinimumTypical
75075F0212Rolls: 1/64 – 1/4
Molded Sheets: Up to 4
160018501251503.55 lbAMS 3216G,
MIL-R-83248C Type II Class 1

Tensile & Elongation physicals are presented in minimum and typical values – we certify to the minimum value.

Compound Number: 075F0212

Unsure on how to read our compound number? Read the page, “How to Read a Compound Number”.

General Information for WARCO Sheet Rubber

Rubber Roll Width

Standard WARCO Sheet rubber rolls are untrimmed and can measure approximately 3” in additional width. Trimmed rolled rubber is provided either 36”, 48” or 55” wide ± 1”

Custom widths are available, please call for details.

Rubber Roll Lengths

Standard Roll approximate length ±10%. Products may vary, please see product listing for standard roll lengths.

Sheet Roll Lengths:

  • 1/64″ thick – 180 feet
  • 1/32” thick – 150 feet
  • 1/16” thick – 100 feet
  • 3/32” thick – 65 feet
  • 1/8” thick – 50 feet
  • 3/16” thick – 30 feet
  • 1/4” thick – 25 feet
  • 5/16” thick – 20 feet
  • 3/8” thick – 16.5 feet
  • 1/2” thick – 12.5 feet

Sheet Rubber Thickness Tolerances

Closer tolerances and Custom thicknesses are available and can be priced on request.

WARCO Thickness Tolerance – Standard RMA

  • 0.031” & thinner: ± 0.010″
  • 0.032″ to 0.061″: ± 0.012″
  • 0.062″ to 0.124″: ± 0.016″
  • 0.125″ to 0.186″: ± 0.020″
  • 0.187″ to 0.374″: ± 0.031″
  • 0.375″ to 0.500″: ± 0.047″
  • 0.501″ to 0.750″: ± 0.094″
  • 0.751″ & thicker: ± 10%

Sheet Rubber Finish

Unless otherwise noted, sheet rubber has a standard smooth finish. Textured (fabric) finish and matte finish are available on most materials at an additional cost. Please call for details.

Sheet Rubber Color

The standard color of our sheet rubber is black, unless noted otherwise. Custom colors and color matching is available.

Test Reports

Short form test results, basic physicals, are available upon request at the time of the order. Full test reports for particular specifications will be also quoted on request. This may include certifying the ozone resistance, heat ageing, compliances, and many more aspects of our product. Certifications are sent with your order upon request at no charge.

More information about the WARCO products is available at General Product Information.

In addition to the previously mentioned specification, we also offer a comprehensive list of tables and explanations relating to the MIL-PRF-6855 specifications for rubber sheet, rubber strips, rubber extruded tubing, and rubber extruded u channels. Learn more at this link.

Fluorozone® is a registered trademark of West American Rubber Company, LLC. All rights reserved. All text containing the word “Fluorozone” is a registered trademarked by West American Rubber Company, LLC regardless of whether the ™ mark is attached or not.

Our rubber products are a proprietary blend of various polymers formulated to meet stated physicals and specifications. The named product polymer is not necessarily the primary polymer representing the highest percentage of the polymer blend. Determination of the suitability of the goods for the uses and applications contemplated by Buyer and others shall be the sole responsibility of the Buyer or user. No guaranty is given with respect to length of service on any particular application. Suggestions or recommendations made by Seller in its product literature concerning uses or applications of the goods are believed to be reliable, but Seller makes no warranty or guaranty of results to be obtained since the conditions of the use and application by Buyer and others are beyond Seller’s control.

View complete Terms & Conditions of Sale for suitability of use and formulations

More Viton™ & Fluorozone® Sheet Rubber Products

Fluorozone® Premium Performance FKM

  • Polymer: 100% Virgin Domestic Fluoroelastomer
  • Durometer: 60 to 75
  • Temperature Range: -20°F to +400°F
  • Primary Feature: 66% Fluorine

Fluorozone® Brown Premium Performance FKM

  • Polymer: 100% Virgin Domestic Fluoroelastomer
  • Durometer: 75
  • Temperature Range: -20°F to +400°F
  • Primary Features: Brown in color, 66% Fluorine

Mil-Spec Viton A

  • Polymer: 100% Virgin Viton™ Fluoroelastomer
  • Durometer: 75
  • Temperature Range: -20°F to +500°F
  • Specs: AMS 3216G, MIL-R-83248C Type II Class 1

Premium Viton A

  • Polymer: 100% Virgin Viton™ Fluoroelastomer
  • Durometer: 60 to 80
  • Temperature Range: -20°F to +450°F
  • Specs: ASTM M1HK