Orange to Pink Flurozone Rubber Logo "FDA Performance FKM"

Product Description

Fluorozone FDA Performance FKM

Fluorozone FDA Performance FKM is formulated for food and lab applications where FDA compliance is required. Made from FDA-approved ingredients per 21CFR 177.2600 including domestic-made premium Fluoroelastomer FKM polymer.

With 66% Fluorine content, this material exhibits resistance to a broad range of oils, fuels, lubricants and most mineral acids. It has very good resistance to many aliphatic hydrocarbon fluids that act as solvents for many other rubbers. Made in the USA.

Samples available upon request.

Product Image

Key Aspects

Temperature Range:-20°F to +450°F
Durometer Range (Shore A ± 5):60 to 75
Tensile Range:900 psi to 1200 psi
Elongation Range:200% to 250%
Finishes Available:Smooth
Talc:Talc-Free Available
Specification:FDA 21 CFR 177.2600
Compound Number(s)Part Number(s)
060F02210044268076004426807700442680780044268079
0044268080004426808100442680830044268084
0044268085004426808600442680870044268088
060F02210044268090004426809100442680920044268093
0044268094004426809500442680970044268098
0044268099004426810000442681010044268102

We comply with the Buy American Act requirements.

Advanced Technical Details

Durometer
Hardness
(Shore A ± 5)
Thickness
(inches)
TensileUltimate
Elongation
Estimated Weight
Per Linear Foot
(1/8″ x 36″)
ComplianceSpecification
Sheets
60
060F0221
Rolls: 1/64 – 1/4
Molded Sheets: Up to 4
1200 psi250%3.76 lbFDA 21 CFR 177.2600
75
075F0223
Rolls: 1/64 – 1/4
Molded Sheets: Up to 4
900 psi200%3.92 lbFDA 21 CFR 177.2600

Tensile & Elongation physicals are presented in typical values – we certify to the minimum value.

Compound Number: 060F0221(60F221), 075F0223(75F223)

Unsure on how to read our compound number? Read the page, “How to Read a Compound Number”.

General Information for WARCO Sheet Rubber

Rubber Roll Width

WARCO Sheet rubber rolls are available in 36” or 48” width. Custom widths available up to 55″. Rolls are untrimmed and can measure approximately 3” in additional width. Trimmed rolled rubber is available upon request.

Custom widths are available, please call (714-532-3355) for details.

Standard Minimum Order Quantity

The minimum order quantity for a standard WARCO Sheet rubber is one roll. For custom applications, please call (714-532-3355) for more information.

Rubber Roll Lengths

Standard Roll approximate length ±10%. Products may vary, please see product listing for standard roll lengths.

Sheet Roll Lengths:

  • 1/64″ thick – 180 feet
  • 1/32” thick – 150 feet
  • 1/16” thick – 100 feet
  • 3/32” thick – 65 feet
  • 1/8” thick – 50 feet
  • 3/16” thick – 30 feet
  • 1/4” thick – 25 feet
  • 5/16” thick – 20 feet
  • 3/8” thick – 16.5 feet
  • 1/2” thick – 12.5 feet

Sheet Rubber Thickness Tolerances

Closer tolerances and Custom thicknesses are available and can be priced on request.

WARCO Thickness Tolerance – Standard RMA

  • 0.031” & thinner: ± 0.010″
  • 0.032″ to 0.061″: ± 0.012″
  • 0.062″ to 0.124″: ± 0.016″
  • 0.125″ to 0.186″: ± 0.020″
  • 0.187″ to 0.374″: ± 0.031″
  • 0.375″ to 0.500″: ± 0.047″
  • 0.501″ to 0.750″: ± 0.094″
  • 0.751″ & thicker: ± 10%

Sheet Rubber Finish

Unless otherwise noted, sheet rubber has a standard smooth finish. Textured (fabric) finish and matte finish are available on most materials at an additional cost. Please call for details.

Sheet Rubber Color

The standard color of our sheet rubber is black, unless noted otherwise. Custom colors and color matching is available.

Test Reports

Short form test results, basic physicals, are available upon request at the time of the order. Full test reports for particular specifications will be also quoted on request. This may include certifying the ozone resistance, heat ageing, compliances, and many more aspects of our product. Certifications are sent with your order upon request at no charge.

More information about the WARCO products is available at General Product Information.

Fluorozone® is a registered trademark of West American Rubber Company, LLC. All rights reserved. All text containing the word “Fluorozone” is a registered trademarked by West American Rubber Company, LLC regardless of whether the ™ mark is attached or not.

Our rubber products are a proprietary blend of various polymers formulated to meet stated physicals and specifications. The named product polymer is not necessarily the primary polymer representing the highest percentage of the polymer blend. Determination of the suitability of the goods for the uses and applications contemplated by Buyer and others shall be the sole responsibility of the Buyer or user. No guaranty is given with respect to length of service on any particular application. Suggestions or recommendations made by Seller in its product literature concerning uses or applications of the goods are believed to be reliable, but Seller makes no warranty or guaranty of results to be obtained since the conditions of the use and application by Buyer and others are beyond Seller’s control.

View complete Terms & Conditions of Sale for suitability of use and formulations

More Viton™ & Fluorozone® Sheet Rubber Products

Viton™ A Brown Sheet

  • Polymer: Viton™ Fluoroelastomer
  • Durometer: 75
  • Temperature Range: -20°F to +400°F
  • Primary Feature: 66% Fluorine

Fluorozone® Premium Performance FKM

  • Polymer: 100% Domestic Fluoroelastomer
  • Durometer: 60 to 75
  • Temperature Range: -20°F to +400°F
  • Primary Feature: 66% Fluorine

Fluorozone® Brown Premium Performance FKM

  • Polymer: 100% Domestic Fluoroelastomer
  • Durometer: 75
  • Temperature Range: -20°F to +400°F
  • Primary Features: Brown in color, 66% Fluorine

Viton™ A FDA Sheet

  • Polymer: Viton™ Fluoroelastomer
  • Durometer: 75
  • Temperature Range: -20°F to +450°F
  • Primary Feature: 66% Fluorine, FDA Approved Ingredients