Brown Fluorozone Logo "Brown Premium Performance FKM"

Product Description

Fluorozone Brown Premium Performance FKM

Fluorozone Brown Premium Performance FKM made with 100% USA-made premium Fluoroelastomer FKM polymer. Fluorozone® Brown Premium Performance FKM exhibits resistance to a broad range of oils, fuels, lubricants and most mineral acids. Furthermore, Fluorozone® has very good resistance to many aliphatic hydrocarbon fluids that can dissolve many other types of rubber. Also, available in Blue and Black.

Samples available upon request.

Product Image

Key Aspects

Temperature Range:-20°F to +400°F
Durometer (Shore A ± 5):75
Tensile:1200 psi
Elongation:200%
Compliances:
RoHS, REACH, & CA Prop 65
Compound Number(s)Part Number(s)
075F02170044267655004426765700442676580044267659
0044267660004426766100442676620044267663
0044267664004426766500442676660044267667

We comply with the Buy American Act requirements.

Advanced Technical Details

Durometer
Hardness
(Shore A ± 5)
CompoundThickness
(inches)
Tensile
(Typical)
Ultimate
Elongation
(Typical)
Estimated Weight
Per Linear Foot
(1/8″ x 36″)
Specification
Sheet
75075F0217Rolls: 1/64 – 1/4
Molded Sheets: Up to 4
1200 psi200%4.40 lb

Tensile & Elongation physicals are presented in typical values – we certify to the minimum value.

Compound Number: 075F0217(75F217)

Unsure on how to read our compound number? Read the page, “How to Read a Compound Number”.

General Information for WARCO Sheet Rubber

Rubber Roll Width

WARCO Sheet rubber rolls are available in 36” or 48” width. Custom widths available up to 55″. Rolls are untrimmed and can measure approximately 3” in additional width. Trimmed rolled rubber is available upon request.

Custom widths are available, please call (714-532-3355) for details.

Standard Minimum Order Quantity

The minimum order quantity for a standard WARCO Sheet rubber is one roll. For custom applications, please call (714-532-3355) for more information.

Rubber Roll Lengths

Standard Roll approximate length ±10%. Products may vary, please see product listing for standard roll lengths.

Sheet Roll Lengths:

  • 1/64″ thick – 180 feet
  • 1/32” thick – 150 feet
  • 1/16” thick – 100 feet
  • 3/32” thick – 65 feet
  • 1/8” thick – 50 feet
  • 3/16” thick – 30 feet
  • 1/4” thick – 25 feet
  • 5/16” thick – 20 feet
  • 3/8” thick – 16.5 feet
  • 1/2” thick – 12.5 feet

Sheet Rubber Thickness Tolerances

Closer tolerances and Custom thicknesses are available and can be priced on request.

WARCO Thickness Tolerance – Standard RMA

  • 0.031” & thinner: ± 0.010″
  • 0.032″ to 0.061″: ± 0.012″
  • 0.062″ to 0.124″: ± 0.016″
  • 0.125″ to 0.186″: ± 0.020″
  • 0.187″ to 0.374″: ± 0.031″
  • 0.375″ to 0.500″: ± 0.047″
  • 0.501″ to 0.750″: ± 0.094″
  • 0.751″ & thicker: ± 10%

Sheet Rubber Finish

Unless otherwise noted, sheet rubber has a standard smooth finish. Textured (fabric) finish and matte finish are available on most materials at an additional cost. Please call for details.

Sheet Rubber Color

The standard color of our sheet rubber is black, unless noted otherwise. Custom colors and color matching is available.

Test Reports

Short form test results, basic physicals, are available upon request at the time of the order. Full test reports for particular specifications will be also quoted on request. This may include certifying the ozone resistance, heat ageing, compliances, and many more aspects of our product. Certifications are sent with your order upon request at no charge.

More information about the WARCO products is available at General Product Information.

Fluorozone® is a registered trademark of West American Rubber Company, LLC. All rights reserved. All text containing the word “Fluorozone” is a registered trademarked by West American Rubber Company, LLC regardless of whether the ™ mark is attached or not.

Our rubber products are a proprietary blend of various polymers formulated to meet stated physicals and specifications. The named product polymer is not necessarily the primary polymer representing the highest percentage of the polymer blend. Determination of the suitability of the goods for the uses and applications contemplated by Buyer and others shall be the sole responsibility of the Buyer or user. No guaranty is given with respect to length of service on any particular application. Suggestions or recommendations made by Seller in its product literature concerning uses or applications of the goods are believed to be reliable, but Seller makes no warranty or guaranty of results to be obtained since the conditions of the use and application by Buyer and others are beyond Seller’s control.

View complete Terms & Conditions of Sale for suitability of use and formulations

More Viton™ & Fluorozone® Sheet Rubber Products

Fluorozone® Blue Premium Performance FKM

  • Polymer: 100% Domestic Fluoroelastomer
  • Durometer: 75
  • Temperature Range: -20°F to +400°F
  • Primary Features: Blue in color, 66% Fluorine

Fluorozone® Premium Performance FKM

  • Polymer: 100% Domestic Fluoroelastomer
  • Durometer: 60 to 75
  • Temperature Range: -20°F to +400°F
  • Primary Feature: 66% Fluorine

Viton™ A Brown Sheet

  • Polymer: Viton™ Fluoroelastomer
  • Durometer: 75
  • Temperature Range: -20°F to +400°F
  • Primary Feature: 66% Fluorine

Viton™ A Sheet

  • Polymer: Viton™ Fluoroelastomer
  • Durometer: 70 to 75
  • Temperature Range: -20°F to +400°F
  • Primary Feature: 66% Fluorine