Blue Flurozone Rubber Logo "Blue Premium Performance FKM"

Product Description

Fluorozone Blue Premium Performance FKM

Fluorozone Blue Premium Performance FKM is made with 100% virgin USA-made premium Fluoroelastomer FKM polymer. Blue in color to make it easily distinguishable from other materials, Fluorozone® Blue Premium Performance FKM exhibits resistance to a broad range of oils, fuels, lubricants and most mineral acids.

Fluorozone® has very good resistance to many aliphatic hydrocarbon fluids that can dissolve many other types of rubber. Also, available in Brown and Black.

Samples available upon request.

Key Aspects

Temperature Range:-20°F to +450°F
Durometer (Shore A ± 5):75
Tensile (min. psi.):1050
Elongation (min. %):200
Finishes Available:Smooth, Nylon
Talc:Talc-Free Available
Specification:RoHS, REACH, & CA Prop 65
Compound Number(s)Part Number(s)
075F02400044270278004427079900442715190044271878

We comply with the Buy American Act requirements.

Advanced Technical Details

Durometer
Hardness
(Shore A ± 5)
CompoundCompression Set
Method B
Tensile (min. psi)Ultimate
Elongation (min. %)
Estimated Weight
Per Linear Foot
(1/8″ x 36″)
Typical
75075F02404510502004.43 lb

Tensile & Elongation physicals are presented in minimum and typical values – we certify to the minimum value.

Compound Number: 075F0240

Unsure on how to read our compound number? Read the page, “How to Read a Compound Number”.

General Information for WARCO Sheet Rubber

Rubber Roll Width

Standard WARCO Sheet rubber rolls are untrimmed and can measure approximately 3” in additional width. Trimmed rolled rubber is provided either 36”, 48” or 55” wide ± 1”

Custom widths are available, please call for details.

Rubber Roll Lengths

Standard Roll approximate length ±10%. Products may vary, please see product listing for standard roll lengths.

Sheet Roll Lengths:

  • 1/64″ thick – 180 feet
  • 1/32” thick – 150 feet
  • 1/16” thick – 100 feet
  • 3/32” thick – 65 feet
  • 1/8” thick – 50 feet
  • 3/16” thick – 30 feet
  • 1/4” thick – 25 feet
  • 5/16” thick – 20 feet
  • 3/8” thick – 16.5 feet
  • 1/2” thick – 12.5 feet

Sheet Rubber Thickness Tolerances

Closer tolerances and Custom thicknesses are available and can be priced on request.

WARCO Thickness Tolerance – Standard RMA

  • 0.031” & thinner: ± 0.010″
  • 0.032″ to 0.061″: ± 0.012″
  • 0.062″ to 0.124″: ± 0.016″
  • 0.125″ to 0.186″: ± 0.020″
  • 0.187″ to 0.374″: ± 0.031″
  • 0.375″ to 0.500″: ± 0.047″
  • 0.501″ to 0.750″: ± 0.094″
  • 0.751″ & thicker: ± 10%

Sheet Rubber Finish

Unless otherwise noted, sheet rubber has a standard smooth finish. Textured (fabric) finish and matte finish are available on most materials at an additional cost. Please call for details.

Sheet Rubber Color

The standard color of our sheet rubber is black, unless noted otherwise. Custom colors and color matching is available.

Test Reports

Short form test results, basic physicals, are available upon request at the time of the order. Full test reports for particular specifications will be also quoted on request. This may include certifying the ozone resistance, heat ageing, compliances, and many more aspects of our product. Certifications are sent with your order upon request at no charge.

More information about the WARCO products is available at General Product Information.

Fluorozone® is a registered trademark of West American Rubber Company, LLC. All rights reserved. All text containing the word “Fluorozone” is a registered trademarked by West American Rubber Company, LLC regardless of whether the ™ mark is attached or not.

Our rubber products are a proprietary blend of various polymers formulated to meet stated physicals and specifications. The named product polymer is not necessarily the primary polymer representing the highest percentage of the polymer blend. Determination of the suitability of the goods for the uses and applications contemplated by Buyer and others shall be the sole responsibility of the Buyer or user. No guaranty is given with respect to length of service on any particular application. Suggestions or recommendations made by Seller in its product literature concerning uses or applications of the goods are believed to be reliable, but Seller makes no warranty or guaranty of results to be obtained since the conditions of the use and application by Buyer and others are beyond Seller’s control.

View complete Terms & Conditions of Sale for suitability of use and formulations

More Viton™ & Fluorozone® Sheet Rubber Products

Fluorozone® Premium Performance FKM

  • Polymer: 100% Virgin Domestic Fluoroelastomer
  • Durometer: 60 to 75
  • Temperature Range: -20°F to +400°F
  • Primary Feature: 66% Fluorine

Fluorozone® Brown Premium Performance FKM

  • Polymer: 100% Virgin Domestic Fluoroelastomer
  • Durometer: 75
  • Temperature Range: -20°F to +400°F
  • Primary Features: Brown in color, 66% Fluorine

Brown Commercial Viton A

  • Polymer: 100% Virgin Viton™ Fluoroelastomer
  • Durometer: 75
  • Temperature Range: -20°F to +400°F
  • Primary Feature: 66% Fluorine

Commercial Viton A

  • Polymer: 100% Virgin Viton™ Fluoroelastomer
  • Durometer: 70 to 75
  • Temperature Range: -20°F to +400°F
  • Primary Feature: 66% Fluorine