Viton™ A Brown Sheet
Viton™ A Brown Sheet, made with Viton™ fluoroelastomers, exhibits a broad range of resistance to oils, fuels, lubricants and most mineral acids. It has very good resistance to many aliphatic hydrocarbon fluids that act as solvents for many other rubbers. Exceptionally good compression set attributes, even at temperatures that can embrittle other non-fluorinated elastomers.
It also exhibits good resistance to atmospheric oxidation, sun, and weather, and has excellent resistance to mold. Made with 66% fluorine content. Made in the USA. Premium, specification, and commercial grades are available.
We comply with the Buy American Act requirements. Samples available upon request.
| Temperature Range: | -20°F to +400°F |
| Durometer (Shore A ± 5): | 75 |
| Tensile (min.): | 1000 psi |
| Elongation (min.): | 175% |
| Finishes Available: | Smooth |
| Talc: | Talc Present |
| Primary Feature: | Viton™ fluoroelastomer |
| Compound Number(s) | Part Number(s) | |||
|---|---|---|---|---|
| 075F0123 | 0044228330 | 0044228334 | 0044228335 | 0044229079 |
| 0044229080 | 0044229481 | 0044229851 | 0044229852 | |
| 0044229939 | 0044262231 | 0044262232 | 0044262233 | |
| 0044262234 | 0044262235 | 0044262236 | 0049231810 | |
| 0049231811 | 0049231813 | 0049232025 | — | |
| Durometer Hardness (Shore A ± 5) |
Compound | Thickness (inches) |
Tensile | Ultimate Elongation |
Estimated Weight Per Linear Foot (1/8″ x 36″) |
Features |
|---|---|---|---|---|---|---|
| Minimum | Minimum | |||||
| 75 | 075F0123 | 1/32 – 1/4 | 1000 psi | 175% | 4.41 lb | Cinnamon Scented, Viton™ fluoroelastomer |
Compound Number: 075F0123(75F123)
Unsure on how to read our compound number? Read the page, “How to Read a Compound Number”.
Rubber Roll Width
WARCO Sheet rubber rolls are available in 36” or 48” width. Custom widths available up to 55″. Rolls are untrimmed and can measure approximately 3” in additional width. Trimmed rolled rubber is available upon request.
Custom widths are available, please call (714-532-3355) for details.
Standard Minimum Order Quantity
The minimum order quantity for a standard WARCO Sheet rubber is one roll. For custom applications, please call (714-532-3355) for more information.
Rubber Roll Lengths
Standard Roll approximate length ±10%. Products may vary, please see product listing for standard roll lengths.
Sheet Roll Lengths:
- 1/64″ thick – 180 feet
- 1/32” thick – 150 feet
- 1/16” thick – 100 feet
- 3/32” thick – 65 feet
- 1/8” thick – 50 feet
- 3/16” thick – 30 feet
- 1/4” thick – 25 feet
- 5/16” thick – 20 feet
- 3/8” thick – 16.5 feet
- 1/2” thick – 12.5 feet
Sheet Rubber Thickness Tolerances
Closer tolerances and Custom thicknesses are available and can be priced on request.
WARCO Thickness Tolerance – Standard RMA
- 0.031” & thinner: ± 0.010″
- 0.032″ to 0.061″: ± 0.012″
- 0.062″ to 0.124″: ± 0.016″
- 0.125″ to 0.186″: ± 0.020″
- 0.187″ to 0.374″: ± 0.031″
- 0.375″ to 0.500″: ± 0.047″
- 0.501″ to 0.750″: ± 0.094″
- 0.751″ & thicker: ± 10%
Sheet Rubber Finish
Unless otherwise noted, sheet rubber has a standard smooth finish. Textured (fabric) finish and matte finish are available on most materials at an additional cost. Please call for details.
Sheet Rubber Color
The standard color of our sheet rubber is black, unless noted otherwise. Custom colors and color matching is available.
Test Reports
Short form test results, basic physicals, are available upon request at the time of the order. Full test reports for particular specifications will be also quoted on request. This may include certifying the ozone resistance, heat ageing, compliances, and many more aspects of our product. Certifications are sent with your order upon request at no charge.
More information about the WARCO products is available at General Product Information.
Viton™ and any associated logo is a trademark or copyright of THE CHEMOURS COMPANY FC, LLC used under license by West American Rubber Company, LLC. Viton™ is a registered trademark of DuPont Performance Elastomers. All text containing the word “Viton” is trademarked by THE CHEMOURS COMPANY FC, LLC regardless of whether the ™ mark is attached or not. | More information about Viton™ can be found here: https://www.viton.com/en/. Fluorozone® is a trademark of West American Rubber Company, LLC
Our rubber products are a proprietary blend of various polymers formulated to meet stated physicals and specifications. The named product polymer is not necessarily the primary polymer representing the highest percentage of the polymer blend. Determination of the suitability of the goods for the uses and applications contemplated by Buyer and others shall be the sole responsibility of the Buyer or user. No guaranty is given with respect to length of service on any particular application. Suggestions or recommendations made by Seller in its product literature concerning uses or applications of the goods are believed to be reliable, but Seller makes no warranty or guaranty of results to be obtained since the conditions of the use and application by Buyer and others are beyond Seller’s control.
View complete Terms & Conditions of Sale for suitability of use and formulations
