Product Description

Viton™ A Specification Grade Sheet

WARCO is approved under the United States Government’s QPL 83248–3. Viton™ A Specification Grade Sheet is formulated to meet the AMS 3216 specification (supersedes MIL-R-83248) and is made with Viton™ fluoroelastomer. This material exhibits a high temperature range (up to 500°F) and increased tensile strength.

Viton™ A Specification Grade Sheet has very good resistance to many aliphatic hydrocarbon fluids that can dissolve many other types of rubber and has resistance to a broad range of oils, fuels, lubricants and most mineral acids. Made in the USA. Premium and commercial grades, and additional specifications are available.

Samples available upon request.

Made with Viton™ Fluoroelastomer, A Brand of the Chemours Company Logo

Key Aspects

Temperature Range:-20°F to +500°F
Durometer (Shore A ± 5):75
Tensile (min.):1600 psi
Elongation (min.):125%
Finishes Available:Smooth
Talc:Talc Present
Specifications:

AMS 3216G

MIL-R-83248C Type II Class 2

Compound Number(s)Part Number(s)
075F00810031267812003126781300312678140031267815
0031267816003126781700312678180031267819
003126782000312678210031267822

We comply with the Buy American Act requirements.

Product Image

Advanced Technical Details

Durometer
Hardness
(Shore A ± 5)
CompoundThickness
(inches)
Tensile
(min.)
Ultimate
Elongation
(min.)
Estimated Weight
Per Linear Foot
(1/8″ x 36″)
Specifications
75075F0081Rolls: 1/64 – 1/4
Molded Sheets: Up to 4
1600 psi125%3.63 lbAMS 3216G,
MIL-R-83248C Type II Class 1

Compound Number: 075F0081(75F81)

Unsure on how to read our compound number? Read the page, “How to Read a Compound Number”.

General Information for WARCO Sheet Rubber

Rubber Roll Width

WARCO Sheet rubber rolls are available in 36” or 48” width. Custom widths available up to 55″. Rolls are untrimmed and can measure approximately 3” in additional width. Trimmed rolled rubber is available upon request.

Custom widths are available, please call (714-532-3355) for details.

Standard Minimum Order Quantity

The minimum order quantity for a standard WARCO Sheet rubber is one roll. For custom applications, please call (714-532-3355) for more information.

Rubber Roll Lengths

Standard Roll approximate length ±10%. Products may vary, please see product listing for standard roll lengths.

Sheet Roll Lengths:

  • 1/64″ thick – 180 feet
  • 1/32” thick – 150 feet
  • 1/16” thick – 100 feet
  • 3/32” thick – 65 feet
  • 1/8” thick – 50 feet
  • 3/16” thick – 30 feet
  • 1/4” thick – 25 feet
  • 5/16” thick – 20 feet
  • 3/8” thick – 16.5 feet
  • 1/2” thick – 12.5 feet

Sheet Rubber Thickness Tolerances

Closer tolerances and Custom thicknesses are available and can be priced on request.

WARCO Thickness Tolerance – Standard RMA

  • 0.031” & thinner: ± 0.010″
  • 0.032″ to 0.061″: ± 0.012″
  • 0.062″ to 0.124″: ± 0.016″
  • 0.125″ to 0.186″: ± 0.020″
  • 0.187″ to 0.374″: ± 0.031″
  • 0.375″ to 0.500″: ± 0.047″
  • 0.501″ to 0.750″: ± 0.094″
  • 0.751″ & thicker: ± 10%

Sheet Rubber Finish

Unless otherwise noted, sheet rubber has a standard smooth finish. Textured (fabric) finish and matte finish are available on most materials at an additional cost. Please call for details.

Sheet Rubber Color

The standard color of our sheet rubber is black, unless noted otherwise. Custom colors and color matching is available.

Test Reports

Short form test results, basic physicals, are available upon request at the time of the order. Full test reports for particular specifications will be also quoted on request. This may include certifying the ozone resistance, heat ageing, compliances, and many more aspects of our product. Certifications are sent with your order upon request at no charge.

More information about the WARCO products is available at General Product Information.

In addition to the previously mentioned specification, we also offer a comprehensive list of tables and explanations relating to the MIL-PRF-6855 specifications for rubber sheet, rubber strips, rubber extruded tubing, and rubber extruded u channels. Learn more at this link.

Viton™ and any associated logo is a trademark or copyright of THE CHEMOURS COMPANY FC, LLC used under license by West American Rubber Company, LLC. Viton® is a registered trademark of DuPont Performance Elastomers. All text containing the word “Viton” is trademarked by THE CHEMOURS COMPANY FC, LLC regardless of whether the ™ mark is attached or not. | Dyneon™ is a trademark of 3M™. More information about Viton® can be found here: https://www.viton.com/en/. Fluorozone® is a trademark of West American Rubber Company, LLC

Our rubber products are a proprietary blend of various polymers formulated to meet stated physicals and specifications. The named product polymer is not necessarily the primary polymer representing the highest percentage of the polymer blend. Determination of the suitability of the goods for the uses and applications contemplated by Buyer and others shall be the sole responsibility of the Buyer or user. No guaranty is given with respect to length of service on any particular application. Suggestions or recommendations made by Seller in its product literature concerning uses or applications of the goods are believed to be reliable, but Seller makes no warranty or guaranty of results to be obtained since the conditions of the use and application by Buyer and others are beyond Seller’s control.

View complete Terms & Conditions of Sale for suitability of use and formulations

More Viton™ Sheet Rubber Products

Viton™ A FDA Sheet

  • Polymer: Viton™ Fluoroelastomer
  • Durometer: 75
  • Temperature Range: -20°F to +450°F
  • Primary Feature: 66% Fluorine, FDA Approved Ingredients

Viton™ A Sheet

  • Polymer: Viton™ Fluoroelastomer
  • Durometer: 60 to 80
  • Temperature Range: -20°F to +450°F
  • Specs: ASTM D2000 M1HK

Viton™ B Sheet

  • Polymer: Viton™ Fluoroelastomer
  • Durometer: 70 to 75
  • Temperature Range: -20°F to +450°F
  • Specs: ASTM D2000 M1HK